If you are looking for the Best Black and Decker Blender Parts Reviews, then you have come to the right place for considering which ones to buy.
There are so many different blenders out there and they come with various parts and accessories, so it can be difficult to decide which one to choose over another. Some of them are portable and others are rather stationary.
Comparison of 5 best black and decker blender parts
However, all of these parts will have the blender, an essential part of any kitchen, back up and running.
We have spent many hours researching customer reviews and Amazon to create a collection of the 15 Best Black and Decker Blender Parts Reviews.
This article offers key features, design specifications, pros and cons and functionalities of each of these 15 models that can be found below.
By reading each of the 15 Best Black and Decker Blender Parts Review, you will be able to know each part closely to make the best decision on which one to buy.
At the end of this article, we will also provide information on the best parts as the best among all 15 Best Black and Decker Blender Parts reviewed. Again, this recommendation will be at the end of this article.
Therefore, please enjoy this article and keep reading.
14 Best Black and Decker Blender Parts Features
These parts all fit most Black and Decker models across time. Therefore, they can be usedin a variety of models throughout history.
Pros and Cons
Most of these parts are OEM authorized to be used in Black and Decker blenders. Some of them are a little too tight for newer models.
They all feature the same durability Black and Decker is known for. They are designed to fit seamlessly into place as their previous counterpart once did.
14 Best Black and Decker Blender Parts Reviews
Please find our 14 reviews of the best Black and Decker Blender Parts.
1. Black And Decker Blender Jar Bottom Screw Cap
This model is the BL5000-11 Jar Bottom Screw cap. It fits the following models: BL1900, BL2900, BL3900, BL4900, BL5000, BL5900, BL6000, and BL9000.
It only weighs about 2.4 ounces. It fits these models rather snuggly. It is the bottom screw gap that will hold the picture to the blender for the locking mechanism.
2. Black And Decker Blender Blade Cutter Review
This part fits models BL1900, BL3900, BL4900, BL5000, BL5900, BL6000, and BL9000.
It is a replacement blade system that is stainless steel. It does not come with the gasket or the rest of the cutting assembly.
3. Black And Decker Blender Parts Review – Blade Cutter
This model works with the 77666 glass jar blade assembly. I will work with most models. It is sold separately from the glass jar.
The gasket is also not included. It will work with the BL10475BM and BL14500 models only.
4. Black And Decker Blender Jar Lid Review
Replacement Blender Jar Lid, Fits Black & Decker 381228-00 Blender Jar. This is replacement for jar lid and center cap models175258-01.
It fits only models BL600B, BL690B, BL700B, and MTB500. It comes with the two-ounce measuring cap on the top, too.
5. Black And Decker Blender Parts Review – O-Ring Gasket
This part is the rubber O-Ring gasket seal part number 13281207 for Black and Decker blenders.
It will only work with the following models: BL1900, BL1900R, BL2900, BL3900SKT, BL4900, BL5000, BL9000, and BLKT5950C.
6. Black And Decker Blender Replacement Parts
This part is made of stainless steel for the FusionBlade, and it is designed to quickly crush ice and evenly blend soups and smoothies.
It has a pair of 20-ounce blending jars that are complete with twist-on travel lids. Beverages on the go will not spill with these cups and lids. All parts are BPA-free, and they are dishwasher safe.
The blending jars will fit single serve models and full-blown models. The blades can only be used with the FusionBlade models, though.
7. Black & Decker Blender Parts Review – Blender Gaskets
This part is made from food-grade silicone rubber. It will not fit model B19000. It is an after-market item, so it is not OEM manufactured.
One ring measures 7 inches by 7 inches by 0.4 inches and it only weighs about 2.4 ounces. The outer diameter is less than three inches.
It will fit a 2020S. It might be a little on the tight side, but it will stretch to fit your blender.
8. Black And Decker Blender Replacement Parts
Review – Blade Cutter
This part features a super sharp blade cutter. It is easy to install and it will fit the following Black and Decker models: BL1900, BL3900, BL4900, BL5000, BL5900, BL6000, and BL9000. These parts are extremely durable.
9. Black And Decker Replacement Blender Blade Cutter
This is replacement model 14291600 for the blender blade that will fit models BL1900, BL3900, BL4900, BL5000, BL5900, BL6000, and BL9000.
This blade measures 2.9 Inches by 2.4 inches by 2.4 inches and it weighs about 2.4 ounces.
This model comes with the clutch piece at the bottom of the blade, so it will fit these models that have previously listed with ease.
10. Blendin Replacement Blade Cutter Review
This part is replacement 77666, and it fits most Black and Decker models. It has a 3 inch diameter at the base. It will fit the BL1111 and the BL1050HB model with ease.
It fits perfectly into a glass jar, so it is a cheap way to make sure a blender gains some life again without having to be thrown out. It will also fit the plastic blending jars, too.
11. Black & Decker Blender Gasket Seal Review
This part is a gasket for a blender seal. Its outside diameter measures 2.75 inches (70 mm) and the inner diameter is 2.13 inches (54 mm).
This is made of food-grade silicone rubber. It might not fit all models. It is an after-market item, and it is not OEM certified. Therefore, not all models will fit this part.
12. Black And Decker Fitsblendin Replacement Blade Cutter
This is a replacement blade for models BL-2020 and BL-2020S. This package only contains one replacement blade.
It does not include anything else in the cutting assembly, such as the gasket. Those items will need to be replaced separately.
13. Black And Decker Blender Cutter Blade Review
This part only fits the following models: BL300, BL450, BL500, BL-300, BL-450 and BL-500. This is a new part, and it is super sharp. It does not include the gasket or other parts of the cutting assembly.
Those parts will need to be purchased separately. It measures 2 inches by 2 inches by 2 inches. This model is rather loud, and it leaks on some models. The gasket from the previous blade being replaced should fit onto this model, too.
14. Black And Decker Rubber Seal For Blender Jar
This model is the rubber seal gasket for glass jars only. It can be used on the following models easily: BL200 TY1, BL550, Bl600, BL600B, BL650, and BL675.
It will not fit other models, though. It measures 6.2 inches by 3.9 inches by 0.3 inches, and it weighs about 0.3 ounces.
The inner diameter is 2.5 inches, so the outer diameter is 2 7/8 inches. It will not fit newer models of blenders, though. It will certainly please customers.
There are so many things to consider when replacing parts for your Black and Decker blender. Buying one of these parts will give your blender a much longer life. They fit so many models, so they are rather reliable.