If you are looking for the Best KitchenAid Blender Parts Reviews, then you have come to the right place for considering which ones to buy.
There are so many different blenders out there and they come with various parts and accessories,so it can be difficult to decide which one to choose over another.
5 best kitchenaid blender parts rating chart:
Some of them are portable, and others are rather stationary. However, all of these parts will have the blender, an essential part of any kitchen, back up and running.
We have spent many hours researching customer reviews and Amazon to create a collection of the 15 Best KitchenAid Blender Parts Reviews.
This article offers key features, design specifications, pros and cons, and functionalities of each of these 15 models that can be found below.
By reading eachof the 15 Best KitchenAid Blender Parts Reviews, you will be able to know each part closely to make the best decision on which one to buy.
At the end of this article, we will also provide information on the best partsas the best among all 15 Best KitchenAid Blenders Parts Reviewed. Again, this recommendation will be at the end of this article.
Therefore, please enjoy this article and keep reading.
15 Best KitchenAid Blender Parts Features
These blenders are all made with durability and versatility in mind. Some of them are made for an extreme outbreak in power from the strong motors.
Pros and Cons
These blenders are made to be durable, but some people question speed. They do not seem to put out the right amount of power out of the gate to achieve a max speed.
Some of these models are made with a soft start to shield ears and to help deal with the impact of larger ingredients.
15 Best KitchenAid Blender Parts Reviews
Please find our 15 reviews of the best KitchenAid Blender Parts.
1. Kitchenaid Blender Coupling Review
This model is made for the Original KitchenAid blender attachment. Installation instructions are included in the package. This part is reverse threaded, so the old one and new one need to be removed and applied accordingly.
This part is only available in black. The part number is 9704230-2PK and it fits models KSB3 and KSB5. It will fit other models too, like the KSB5WW3 and KSB50B4.
The coupling screws on to a round piece of metal that is impossible to stabilize if you aren’t aware that it has a flat side.
Many people have reported giving up and reordering the part with the tool after several frustrating attempts to remove the couple with a screw driver per the instructions that come with the part.
You just need to stabilize the pole by jamming a flat head screwdriver up against it to keep it from turning. The instructions state that you’re supposed to bend the coupling up with a screwdriver and turn lifting it higher with each turn.
This coupling should not be used with hot ingredients, less the coupling might melt over time. This part will make all blenders as good as new for a fraction of the cost with this part.
2. Kitchenaid Blender Coupler Review
This part fits models KSB3 and KSB5. The blender’s rubber coupling is designed to break is the blender is under strain.
This specially designed removal tool or spanner is small enough to slide under the rubber coupler and clutch of the above KitchenAid models and it will allow the coupler to be twisted off.
It should be used carefully to avoid scratches that can occur when a screwdriver is used instead of this tool.
It measures 5.8 inches by 0.8 inches by 0.1 inches and it weighs about 0.6 ounces. This coupler will work mostly with newer models. It will not work as well with older models.
3. Kitchenaid Blender Replacement Parts – Cutter Blade Assembly With Gasket
If the jar this part will go on has a screw on lid, then this blade will not fit. This new replacement part will replace the knife blades worn or broken.
It’s easy to place it in the receptacle of glass, having been designed to be removed for cleaning by unscrewing the nut.
The version-size blades and angles of the original slides accompany most blenders KSB5 and KSB52. This version is much easier to remove for cleaning.
The change of the size and angle of the cutter blades are of little difference in the ability of the mixing blender aliments.
The blade is provided with a new seal. This part measures 5.9 inches by 4.9 inches by 4.2 inches, but it weighs about 5 ounces.
4. Kitchenaid Blender Jar Review
This part is the jar assembly for the 5-speed midline blender. It also includes the blade assembly. It measures 12.7 inches by 9.7 inches by 9.3 inches and it weighs about 2.5 pounds.
Use chopped frozen fruit to turn it into smoothies, so do not worry about putting a strain on this part or putting it through the dishwasher. This part can wear out over time due to these two stressors though.
5. Kitchenaid Blender Replacement Pitcher Review
This part fits KitchenAid blender models KSB540, KSB560, and KSB580. It has built-in drain holes to eliminate food traps and to make cleaning easier in the long run. It is also dishwasher safe.
The jar is shatter-resistant and made of polycarbonate and it comes with a black lid. The lid has a two-ounce measuring cup insert at the top to use for measuring and adding more ingredients during the blending cycle.
This jar holds 56-ounces. This part comes with the cutting assembly intact. This part will replace the original part in the above models with ease and it will work better and longer than the original part too.
This jar can be used for smoothies or it can be used for making baby food.
6. Kitchenaid Blender Replacement Parts
Review – Blender Blade
This part is a universal type of Whirlpool, Maytag, KitchenAid, Amana, and Magic Chef.
This part number 9704291 (AP3085609) will fit 831731, AH401674, EA401674, PS401674, 9706716, 9704267 and 9704203. It weighs about 5.6 ounces.
7. Kitchenaid Blender Replacement Collar Parts
This part is OEM authorized. It fits various KitchenAid models. It is OEM part number 9704252 and it is manufactured in the United States.
It measures 1 inch by 1 inch by 1 inch, and it weighs far less than one pound.
8. Kitchenaid Blender Parts Review – W10279518 Replacement Collar Parts
This part is OEM authorized part number W10279518, It will fit various KitchenAid models, and it is made in the United States.
9. Kitchenaid Blender Replacement Parts Review –
This part works with the following models: 5KSB555BAC0,5KSB555BBU0, 5KSB555BCS0, 5KSB555BER0, 5KSB555BMY0, and 5KSB555BNK0.
It measures 6 inches by 5.1 inches by 2 inches and it weighs approximately 5 ounces. This part will easily replace the old one and it should fit tighter due to a lack of wear and tear.
10. Kitchenaid Blender Replacement Repair Kit Review
These parts are two couplings and a blender gasket. The blundering coupling and seal only fit KitchenAid blenders using jars with push-on lids.
This part roughly measures 7 inches by 7 inches by 7 inches and it weighs about 3 ounces. This package is supposed to make any blender get up and run once more.
11. Kitchenaid Blender Dome And Blade Upper Coupling
This part is OEM authorized part number 9704291. This part is approved for a proper fit. It is brand new and comes in original, retail packaging. This part is the dome and blade upper coupling.
It replaces the following: 831731, 9704203, 9704267, and 9706716, AH401674, EA401674, and PS401674. It will fit more brands than just KitchenAid. It will also fit Whirlpool, Amana, and Jenn-air products, too.
12. Kitchenaid Blender Jar Lid Review
This part works with models 5KSB52-4,5KSB5-4,KSB33, KSB354OB0,KSB354WH0, KSB5, and KSB53. This will fit the original lid on these models only.
It will bring a blender back to life for many more years of usage. There is no need to throw a blender away just because the lid has gone missing.
13. Kitchenaid Blender Parts Review – Wp970936
This part is WP970936 and it is a blender seal. It replaces part number 9709366.
14. Kitchenaid Blender Replacement Coupling Parts Review
This part is a rubber coupling piece. It is OEM authorized and it is part number W10279256. The package measures 1 inch by 1 inch by 1 inch and it weighs about 0.8 ounces. This part will repair the motor base of most KitchenAid models.
It does not have instructions with it about how to remove the old part and add in the new one, so instructions have to be searched for throughout the internet.
A hammer and screwdriver can be used to loosen the older part and the new part should slide into place easily once the older part is removed.
15. Kitchenaid Blender Replacement Seal Parts Review
This part is OEM authorized, and it is part number 9704204. It will fit most KitchenAid blenders that have been produced over the last decade.
The package measures 1 inch by 1 inch by 1 inch and it weighs about 0.3 ounces.
There are so many things to consider when wanting to place the part in a blender. Going through the process of replacing this part will cost less than replacing blenders every time they break. That is why KitchenAid blenders have been made with similar since the beginning.