If you are looking for the Best Ninja Blender Parts Reviews, then you have come to the right place for considering which ones to buy.
There are so many different blenders out there and they come with various parts and accessories,so it can be difficult to decide which one to choose over another.
Some of them are portable and others are rather stationary. However, all of these parts will have the blender, an essential part of any kitchen, back up and running.
We have spent many hours researching customer reviews and Amazon to create a collection of the 15 Best Ninja Blender Parts Reviews.
🔗5 best Ninja blender parts rating chart:
This article offers key features, design specifications, pros and cons and functionalities of each of these 15 models that can be found below.
By reading each of the 15 Best Ninja Blender Parts Review, you will be able to know each part closely to make the best decision on which one to buy.
At the end of this article, we will also provide information on the best parts as the best among all 15 Best Ninja Blender Parts reviewed. Again, this recommendation will be at the end of this article.
Therefore, please enjoy this article and keep reading.
🔗15 Best Ninja Blender Parts Features
All of these parts are made to OEM standards, so they are guaranteed to work on many models that might need something replaced.
Models from as far back as the 1970s can even find renewed use with some of these parts. Therefore, a blender can almost live forever.
Pros and Cons
Many of these parts are made of better materials than their predecessors, so they might last longer than the previous part in its place did. Some of the fits can be a little loose or a little tight on some models.
Most of these models are made to the same or higher expectations of their original counterparts. They are meant for a durable, reliable fit.
🔗15 Best Ninja Blender Parts Reviews
Please find our 15 reviews of the best Ninja Blender Parts.
1. Ninja Replacement Blade Review
This part is a direct replacement blade for Ninja 1100-watt, 1200-watt and 1500-watt models, which includes NJ600, BL770, BL771, BL780, BL660, BL682, BL640, BL641, BL642 and BL773CO.
These blades feature the coveted Ninja Total Crushing Technology and it is an authentic Nutri Ninja product. This blade is made specifically for models that have 72-ounce pitchers.
It measures 8 inches by 2 inches by 2 inches and it weighs 6.1 ounces total. It will not work with the Master Prep Professional System.
The blades are very sharp, so they do not need to be sharpened, but customers should be careful when they handle or wash these blades so as not to cut themselves.
2. Ninja Blender Pitcher Review - Parts For Ninja Blender
This pitcher is made of plastic and it holds 72-ounces worth of ingredients. It only fits the Ninja BL660 and BL740 models.
It measures 12.9 inches by 8.8 inches by 8.7 inches and it weighs approximately 2.9 pounds. This model does not include the blade, but it does include the lid.
Customers claim that they wish this part were more durable because they do not fare well under constant use, especially when they are placed in the dishwasher after each use.
Also, some customers wish it would fit all square Ninja models because this part is highly accessible whereas pitchers for other models are not.
3. Ninja Blender Replacement Pitcher Review
This pitcher holds 72 ounces of ingredients and it has graduated measurements on the side. These measurements are both in ounces and in cups. The maximum number of cups it will hold is nine.
This part will only fit Ninja blender models BL700, NJ600 and NJ602. It will not fit Auto IQ, Ultima, Duo, BL770, BL771 and BL780 blender models.
Once more, customers should make sure to compare their blender part and blender model numbers before purchasing this product.
The base, lid and blade system are not included with this pitcher, so they need to be purchased separately. This part is made of plastic. It measures 10.2 inches by 8.9 inches by 8.7 inches and it weighs about two pounds.
4. Ninja Food Processor Bowl Attachment Kit Review
This part is a food processer bowl attachment for Ninja blender models BL770, BL771, BL780, BL660 and BL663. It holds 64 ounces worth of ingredients and it has graduated measurements in ounces on the side.
This model is an authentic Nutri Ninja Product, but it does not fit the Auto IQ, Ultima, or Duo models. This model includes the bowl, chopping blade and lid, so these items do not need to be purchased separately.
They come together as a package. It measures 9 inches by 9 inches by 8 inches and it weighs about 2.2 pounds. It will not fit all of the BL6** models. It will only fit the models listed above.
Some customers are concerned that Ninja as a brand has so many models to pick from that do not overlap, which makes finding the right replacement part rather tricky.
5. Ninja Blender Pitcher Locking Lid Review
This pitcher lid will fit some 1100-watt, 12-watt and 1500-watt Ninja models. It specifically fits models BL700, BL770, BL771, BL772, BL773, BL780, BL600, BL660, NJ600 and so on.
It will fit the Mega, Ultra and Professional Kitchen Systems, but it will not fit the Auto IQ, Duo and Ultima pitcher models. It is for an extra-large, 72-ounce blender carafe.
It is made of rubber and the pour spout on one of the corners and the locking part of the lid that keeps in ingredients during blending are made of plastic. It measures 6 inches by 6 inches by 1.5 inches and it weighs only 6.6 ounces.
It does not include the blender pitcher or blade system. Some customers are concerned that this model does not exactly fit all blender models that have been mentioned above. The fit is either too tight or too loose.
The plastic parts of this lid cannot be purchased separately, so if those sections are the only ones that need replaced, then the whole lid needs to be replaced too.
Also, these parts might not completely snap in place as the plastic glides on the sides do not 100 percent align with one another.
6. Ninja Replacement Cup Set Review
This pair of cups is for single serve Ninja models. They are 16 ounces in size to the max fill line provided on the side of the cups. They are clear with gray lids.
These are not store returns or liquidation items, meaning they come in their original or similar packaging. They have four tabs. Please be sure to look at the part being replaced and make sure they also have these four tabs.
These cups will fit model numbers BL660 (1100 watt), BL663 (1100 watt), BL740, BL770, BL771, BL772 (1500 watt), BL780 (1200 watt), BL810, BL820 and BL830. Basically, they will fit all of the BL*** model blenders.
7. Ninja Replacement Pitcher Review
This pitcher will only fit models BL770, BL771 and BL780. Therefore, they do not fit Auto IQ, Ultima, Duo, BL700, NJ600 and NJ602 model blenders. Therefore, buyers need to compare their part and model numbers before purchasing this blender.
The blender base and lid are not included with this blender carafe, so they need to be purchased separately. It measures 13.2 inches, by 8.9 inches by 8.8 inches and it weighs about 2.3 pounds.
The BL7730CO pitcher requires a different lid than this carafe, so the BL771 pitcher might be a direct replacement other than the lid sizes.
There are concerns that this blender is not as sturdy as other models on the market, which could serve to be a problem for the price of this replacement part. IT is made of plastic and it might not fare well in the dishwasher. It could crack.
8. Ninja Blender Parts Review - Power Motor
This motor base is brand new and it has 1500-watts of power. It will work with Professional Kitchen System models BL770, BL771, BL772, BL780, BL660 and BL740 Mega Supra.
This part is the base only and it does not come with any other parts. It is an authentic Ninja Kitchen System product. It has four speed modes which include dough, blend, crush and single serve. It also has pulse and ice functions, too.
9. Pitcher Bowl Splash Guard Lid - Ninja Replacement Parts Review
This part is a genuine, authentic Ninja Splash Guard lid for 40-ounce and 48-ounce bowls and pitchers. It features a pouring spout.
It will fit models QB1000, QB1002, QB1003, QB1004 and QB1005. It measures 6.9 inches by 6.7 inches by 1.9 inches and it weighs 6.2 ounces.
10. Ninja Parts - Ninja Replacement Pitcher Bowl
This part is an authentic part for Ninja Blender Master Prep pitchers. It will only fit models QB1000, QB1002, QB1003, QB1004 and QB1005.
It measures 8 inches by 7.3 inches by 7.3 inches and it weighs about 14.9 ounces. The lid needs to be purchased separately. This pitcher will crack if overused or placed through the dishwasher too many times.
11. Pitcher Bowl Splash Guard Lid - Ninja Blender Replacement Parts
This part is a genuine, authentic Ninja Splash Guard lid for 16-ounce bowls and pitchers. It fits the QB1000, QB1002, QB1003, QB1004 and QB1005 models only.
This part does not feature a pour spout. This item may have a small scratch on the outside. It measures 5 inches by 4.9 inches by 2.1 inches and it weighs about 4.5 ounces.
12. Ninja Replacement Parts Review - Pod Motor Head
This motor head is an authentic Ninja Master Prep Professional 450-watt power motor head replacement. It fits models QB1000, QB1002, QB1003, QB1004 and QB1005.
It measures 7.8 inches by 6.9 inches by 4.5 inches and it weighs about 2 pounds.
13. Nutri Ninja With Sip & Seal Lid Review
This part is a durable, double-walled insulated cup that keeps beverages colder for up to four hours.
It is slim in design, so it fits most cup holders, making it ideal for commutes with nutrient drinks on-the-go.
It has a sup and seal lid to help with this on-the-go experience. It attaches to Pro Extractor blades that included with the blender.
These blades are not included with this cup. They are able to break through vegetables, fruits, nuts, seeds and ice without worry. This cup is BPA-free, lead free and phthalate free.
14. Dough Paddle For Ninja Kitchen System - Ninja Blender Parts
This part is one dough paddle attachment. It is dishwasher safe and it is brand new.Holding the dough paddle by the shaft, place it onto the gear shaft inside the bowl.
Ensure that the attachment fits around the gear shaft and that it is standing straight. Important: use only the “dough” button when using this attachment.
Use the dough station when using the dough paddle on speed. This part measures 3 inches by 3 inches by 1 inch.
15.Ninja Blade - Replacement Parts For Ninja Blender
This replacement blade is for the Ninja 64-pounce food processor bowl. It fits models BL770, BL771, BL780 and BL660.
It will not fit the 1100-watt BL700 model. This part is an authentic, brand new Ninja Kitchen Systems product.
Which is the Ninja Blender Parts?
The Best Ninja Blender Parts has many aspiring stars for this title. The best of the best, though, is Ninja Replacement Blade because of all the models that it will fit. This part is a very versatile tool.
There are so many things to consider when wanting to place the part in a blender. Going through the process of replacing this part will cost less than replacing blenders every time they break. That is why Ninja blenders have been made with similar since the beginning.