If you are looking for the Best NutriBullet Blender Parts Reviews, then you have come to the right place for considering which ones to buy.
There are so many different blenders out there and they come with various parts and accessories, so it can be difficult to decide which one to choose over another.
🔗Comparison of 5 best nutribullet blender parts
Some of them are portable and others are rather stationary. However, all of these parts will have the blender, an essential part of any kitchen, back up and running.
We have spent many hours researching customer reviews and Amazon to create a collection of the 15 Best NutriBullet Blender Parts Reviews.
This article offers key features, design specifications, pros and cons and functionalities of each of these 15 models that can be found below.
By reading each of the 15 Best NutriBullet Blender Parts review, you will be able to know each part closely to make the best decision on which one to buy.
At the end of this article, we will also provide information on the best parts as the best among all 15 Best NutriBullet Blender Parts reviewed. Again, this recommendation will be at the end of this article.
Therefore, please enjoy this article and keep reading.
🔗15 Best NutriBulletBlender Parts Features
All of these parts are made to OEM standards, so they are guaranteed to work on many models that might need something replaced. Models from as far back as the 1970s can even find renewed use with some of these parts. Therefore, a blender can almost live forever.
Pros and Cons
Many of these parts are made of better materials than their predecessors, so they might last longer than the previous part in its place did. Some of the fits can be a little loose or a little tight on some models.
Pros and Cons
Most of these models are made to the same or higher expectations of their original counterparts. They are meant for a durable, reliable fit.
🔗15 Best NutriBullet Blender Parts Reviews
Please find our 15 reviews of the best NutriBullet Blender Parts.
1. Nutribullet Replacement Parts - Cup & Blade
This model contains extractor blades, a tall cup and a short cup. The cups come with comfort lip rings to protect mouths from the threading on the jars.
The blades are used for crushing and extracting the best out of ingredients while leaving the end result smooth and without chunks. These parts are easy to clean up and are dishwasher safe.
2. Nutribullet Gasket Review
This package comes with three gaskets that have a lip. These parts fit the Nutribullet 900-watt only. It does not fit the Magic Bullet, Nutribullet Lean, or Nutribullet RX. It is made of high-quality silicone.
It needs to be purchased with the blade system separately. It measures 3.9 inches by 3.7 inches by 0.7 inches and it weighs about 0.3 ounces. It will not fit the 26TS. It will fit the NB-BA028 emulsifying cross blade.
3. Nutribullet Extractor Blade Review
This is a replacement extraction blade for the 600-watt and 900-watt Nutribullet blender. It measures 5.6 inches by 5 inches by 2.2 inches and it weighs approximately 7.2 ounces.
The blade is extremely sharp, so it does not need to be sharpened. It does not come with the gasket that will be needed for the assembly, so that will need to be replaced separately.
4. Top Base Gear - Nutribullet Parts Review
This package contains three spare top base gears. They measure 6 inches by 2.1 inches by 0.3 inches and they weigh 0.3 ounces each.
It will work with the 600-watt motor and the 900-watt motor. It will only fit these two, original Nutribullet models. IT will not work with the Nutribullet Lean 1200W.
5. Nutribullet Extractor Blade Replacement For Nutribullet 600w 900w Blenders
This is an extractor blade with one gasket. This part will only five the 600-watt and 900-watt original NutriBullet. It does not fit any other Bullet model. This is not an OEM part.
It is an after-market item. It will fit the NBR12 with ease. This part will work better than the part in the original Nutribullet, though.
When you fill your container with your ingredients past the fill line is when the smoothie leaks from the seals.
The pressure from being overfilled will push the smoothie past the seals, the seal around the extractor blade gasket and the seal around the bearing. Overfilling exceeds the pressure limitations of the seals.
The three switches will even start to stick because some smoothie material will migrate into the switches when it leaks and makes them stick.
Once the seal has been compromised on the bearing it can cause it to seize rendering the extractor blade useless.
When the seal around the bearing starts to leak you can get smoothie material from the last smoothies you made and it can make you sick.
You can see some brown sticky stuff oozing from the bottom side of the extractor blade after the bearing seal has been compromised.
It is that brown sticky stuff that can migrate into your fresh smoothie that will make you sick. So don’t overfill past the fill line with either your solid smoothie ingredients or your liquid.
6. Bush Rubber Replacement Parts For Nutribullet
This part is for both the 600-watt and 900-watt version of the original Nutribullet. It measures 1 inch by 0.1 inches by 0.1 inches and the package weighs about three ounces.
This part does not fit exactly into the plug holes.
They are a little bit of a stretch to fit. They will not pop out of place as easily as the original models, though. These parts could mean saving you money on having to buy a new model.
7. Nutribullet Replacement Cup Review
These parts are compatible with NutriBullet accessories. It is the 24-ounce cup with a lip ring.
It can be used with the NutriBullet 600-watt and 900-watt models.
It includes a screw on and screw off lip ring for a smooth drinking experience. It is dishwasher safe and BPA-free.
8. Nutribullet Replacement Parts - Stay Fresh Resealable Cup Lids
These are two stay-fresh lids for storing ingredients in the sealable cups.
They will only fit Nutribullet models 600-watt and 900-watt.
They can be stored in the fridge. They can be washed in the dishwasher, too. They come with a one-year warranty.
9. Nutribullet Replacement Cup With Flip Top To-Go Lid
This part is compatible with the 32-ounce tall blending cups. It works with the Original 6-watt and 9-watt Nutribullet.
Flip top lids are included for an on-the-go experience.
They are easy for travel and will fit in most car cup holders. These parts are dishwasher safe and BPA-free.
10. Nutribullet Replacement Parts Set Review
This part comes with two rubber base gears, two top base gears, eight bush rubbers and three gaskets.
These parts are to be used only on the 600-watt original Nutribullet.
11. Nutribullet Replacement Cup Lids Review
These two lids can be used to keep any ingredients in one of the cups for Nutribullet 600-watt and 900-watt models fresh for days.
They can be used in the dishwasher and they are made of BPA-free plastic.
They can also be stored in the fridge or taken on the go. They will not fit the 16-ounce cups, though. These ensure a tight fit.
12. Blade Extractor Blade Juicer Accessories For Nutribullet
This part is made as the extractor blade for the 600-watt Nutribullet. It is completely new and made with 100 percent high quality. It weighs approximately 5.1 ounces.
The bottom measures 16.6 cm and the total height is 22.2 cm. It will work with model NB-101S with ease. This is the perfect replacement for those blades.
13. Nutribullet Blender Cup Review
This part is an original of the Nutribullet tall blending cup that holds 24-ounces of ingredients. IT has a screw off lip ring for a relaxed drinking experience.
It is made of BPA-free plastic, so it is also dishwasher safe.
14. Nutribullet RX Replacement Parts – Gasket
This part is made from food-grade silicone rubber. It might not fit all models. The inner diameter measures 88.5 mm or 3.5 inches and the outer diameters measures 100 mm or 3.95 inches.
The thickness is about 5.9 mm or about 0.2 inches. It will not fit the Baby Bullet or Magic Bullet. This is an after-market item, so it is not OEM certified.
It measures 4.3 inches by 4 inches by 0.2 inches and yet it only weighs about 0.3 ounces. These should snap back in place rather easily.
15. Nutribullet RX Parts - Extractor Blade
Not much is known about this part. It is a replacement blade only for the Nutribullet RX 1700-watt model. These are extractor blades that are rather sharp and powerful.
These blades look identical to the original, but it might not fit completely. This part is after-market and not an OEM certified part.
🔗Which is the NutriBullet Blender Parts?
The Best NutriBullet Blender Parts has many aspiring stars for this title. The best of the best, though, is the Replacement Blade and Gasket.
It fits most items, and it will do just the same process as the original blender part.
There are so many things to consider when wanting to place the part in a blender. Going through the process of replacing this part will cost less than replacing blenders every time they break.
That is why NutriBullet blenders have been made with similar since the beginning.